Become a Sustainavore!

Eat for your health, the planet, and your values.

Become a Sustainavore!

Eat for your health, the planet, and your values.

Project: Magnetic Spice Containers

I’ve been wanting to do this project for a while now, and with a long weekend (and my birthday today) I decided to give myself a present and make it happen. Digging around in my cabinets searching for spices is frustrating. This system makes it super easy so find what you need. Ideally, the herbs and spices should be stored in dark containers. I’ve seen other bloggers make creative labels for their containers. I go through them so quickly and these clear lids allow me to see my stock levels quickly so when I’m ready to go to the store, I know exactly what I need to replenish.

First, I ordered Tin Clear Top 4oz w/Clear Lid containers.  They’re日本藤素
about $1.00 each plus shipping. I really like how snugly the lids fit on these containers. Then, I found some strong magnets online, and even called the company for advice on which magnets would work best for the job, about $0.12 each plus shipping. Finally, I bought quick setting epoxy at the local hardware store. I put down some paper so the epoxy wouldn’t get all over the table.

I mixed the epoxy and applied a small dab of it to the bottom of each tin. The magnets were very difficult to separate from each other – one even broke in half, so I do suggest you buy a few extra for the project. Another piece of advise is unless you like your hands covered in epoxy, I suggest you separate one magnet and then SET THE STACK OF MAGNETS DOWN, and not keep them in your hand while you try to apply the individual magnet to the can. The stack of magnets are very strong and attract all the tins. Keep the stack of magnets far away from your tin.

While the epoxy cured, I make the labels. Using clear tape, I entered as many spice names as I could on one strip. If you do each spice name individually and print it out one at a time, it will take much longer and use more tape.

I cut each name apart with scissors and attached them to the lids.

When I finished the lids, I checked on the magnets and although the package said to wait 24 hours for it to fully cure, I was too impatient and decided to fill the tins with the spices. In no particular order, I put them on the fridge. If you have one of those fancy stainless refrigerators that is not magnetic, you can purchase a magnetic strip that you can attach to your wall. I’m so thrilled to be able to see all of my herbs and spices in one place! Also, buying them in bulk either from your local natural foods store or online saves money. The whole project too only about 45 minutes from start to finish.

 

 

 

My posts may contain affiliate links, which means you don’t pay any more, but I may make a small commission, which helps me continue to bring you great new posts. Read my full disclosure/disclaimer here.

Enjoy This Post? Share It With Friends!

Facebook
Twitter
LinkedIn
Pinterest

7 thoughts on “Project: Magnetic Spice Containers”

  1. Thanks for this post! I stumbled across it while looking for a way to store my spices in magnetic containers without spending a fortune. Can’t wait to finally get my spices organized!

    1. You’re welcome! It works great. I’m about to make some more – 30 containers weren’t enough for my collection. Enjoy!

  2. Is that the correct link for magnets? in your post you say they are about $0.02 per piece, but the link brings me to a magnet that is $0.14 per piece ($0.13 if you buy 80 or more etc…). Obviously cheaper is better, but more so I just want to make sure I’m getting the right magnets. Thanks!

Leave a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Stay Up To Date

Join 60,000+ advocates just like you!

Stay Up To Date

Join 60,000+ advocates just like you!

Scroll to Top

Sign Up for my newsletter Below, and You'll Receive Instant access to all my Free Monthly Downloads!